Large-Size Tile Installation
Preparation, bonding, joint and handling guidance for 60×120 cm, 120×120 cm and slim porcelain tiles.
Why It Needs Care
Large-size tiles create surfaces with fewer joints. As tile size increases, substrate flatness, full adhesive contact and lippage between tiles become more critical. Correct preparation and suitable materials ensure a durable and attractive installation.
Substrate Preparation
- Check the substrate carefully before installation. It should be a cement-based render or screed with 400–500 kg/m³ cement content, flat, clean, dry, sound and load-bearing.
- On underfloor heating, mixed substrates and outdoors, apply a primer and add a latex additive to the porcelain tile adhesive to increase bond strength.
- Check flatness with a long straightedge and apply a levelling screed or self-levelling compound where needed.
- Screeds and renders must be fully cured.
- Building movement joints must be carried through the tiling in the same position.
Adhesive and Bonding
- Use flexible, high-bond porcelain tile adhesives and grouts; for large-size and slim tiles, class C2 adhesives with high deformability (S1 or S2) according to EN 12004.
- Apply adhesive to both the substrate and the tile back (back-buttering) so that no voids remain beneath the tile.
- Use a notched trowel of suitable depth and press the tile into place to spread the adhesive.
- Follow the adhesive manufacturer’s open time and instructions.
Joints and Levelling
- All Cybele Tile products are rectified; nevertheless, tiles must not be laid without joints. Joints of 3 mm indoors and 5 mm outdoors are recommended.
- Tile levelling clip systems are recommended to prevent lippage.
- For rectangular tiles such as 60×120 cm laid in a staggered pattern, limit the offset to one third of the tile length.
- Plan movement joints in large areas and at wall junctions.
Handling and Cutting
- Carry large tiles upright with at least two people; use vacuum lifters for 120×120 cm and larger.
- Cut with large-format cutting tables or diamond tools.
- Store boxes upright on a flat surface.
Laying Direction
Make sure the arrows on the back of the tiles all point in the same direction during installation.
Box, Shade and Batch Information
- First-quality products are packed in separate boxes and pallets according to production shade (T1, T2, T3); there is no colour or shade difference within the same batch.
- Use tiles of the same size and shade code in the same area.
- Check colour, shade and size tolerances before installation and dry-lay the tiles to detect any differences.
- Keep the information on the boxes for quality tracking.
- No complaints regarding visible characteristics are accepted once the tiles have been installed.
During and After Installation
- Installation by certified, experienced tilers is recommended; technical advice is available from Cybele Tile before installation.
- Protect tiles from staining and scratching during and after installation.
- Select products whose technical properties suit the area of use.
- In high-traffic areas such as shopping centres, airports, commercial spaces and hotel entrances, install entrance matting to remove abrasive dirt.
Distribution of Faces
Each product consists of several faces. For a natural look, dry-lay tiles from several boxes before installation and avoid placing identical faces side by side. Every product page shows all faces of the product.
Cleaning
Remove cement and grout residues after installation with a suitable cleaner. Do not use abrasives on Full Lappato (polished) surfaces; products containing hydrofluoric acid damage porcelain.
This page provides general guidance. Always follow the instructions of the adhesive and grout manufacturers and applicable standards.