
Step – 45° Mitre
Porcelain step and riser
Regular Stock · Always Ready
Tread and riser are joined with a 45° mitre for a sharp, clean edge. With an anti-slip strip, it gives a monolithic look to modern staircases.
- Catalogue size
- Made to measure: riser height (A), tread depth (B), step length (C)
- Thickness
- 5 · 8 · 9 mm
- Finish
- Collection finishes
- Faces (graphics)
- —
Faces · 1 face

Each tile carries a different face of the design. For a natural look, mix tiles from different boxes during installation.
Overview
- Product type
- Porcelain step and riser
- Series
- Complementary Pieces
- Colour family
- All colours
- Application
- Indoor and outdoor stairs
- Edges
- Rectified
- Conformity
- CE · TSE · EN 14411
Colour
Available in every pattern and colour of the collection; tread and riser meet in the same design.
Finish
Produced in the same finishes as the collection: Full Lappato, Matt or Sugar Effect; anti-slip finishes and grooves available for steps.
Technical Properties
Download data sheet (PDF)| Property | Test standard | Requirement | Declared value |
|---|---|---|---|
| Product class | TS EN 14411 Annex G | Group BIa (GL) | Dry-pressed porcelain tile |
| Water absorption | TS EN ISO 10545-3 | E ≤ 0.5% | 0.15% (average) |
| Breaking strength (S) | TS EN ISO 10545-4 | ≥ 1300 N (≥ 7.5 mm) · ≥ 700 N (< 7.5 mm) | 2953 N (average)* |
| Modulus of rupture (R) | TS EN ISO 10545-4 | ≥ 35 N/mm² | 47.4 N/mm² (average)* |
| Reaction to fire | 96/603/EC | — | A1FL (without testing) |
| Frost resistance | TS EN ISO 10545-12 | Required | Resistant |
| Slip resistance | DIN 51130 / DIN 51097 | — | R9–R13 · A/B/C (on request) |
| Release of dangerous substances | TS EN ISO 10545-15 | — | Pb < 0.1% · Cd < 0.02% |
* Declared values are averages of results measured on 600×1200 mm, 9 mm samples from different production batches; values may vary with thickness and size. Images are indicative; shade and pattern variation between faces is a natural characteristic of the product.
Every product in the collection can be produced in these sizes and finishes, independent of its catalogue size. The minimum order quantity for project-specific production is 5,000 m².

